Lynskey Ridgeline 27.5 Titanium Hardtail MTB Frame 2018

Titanium out performs all other materials in regards to fatigue resistance, corrosion resistance, and ride quality.

Lynskey frames are amongst the best in the world for their design, craftsmanship, and attention to detail.

Common Sizing Standards The Ridgeline 27.5 features popular sizing standards such as a 73mm threaded bottom bracket shell, 12x148mm dropouts, 34.9mm front derailleur clamp, and accepts a 27.2mm seatpost. So, if you're planning on re-using your existing components there's no model specific or less commonly found size requirements as with some brands. Built to perform With clearance for up to 2.5" tyres at the rear, you'll be able to fit on your favourite wider trail tyre so you can hang on in the corners at high speed and blast over those rock sections.

Plus, as the frame can handle up to a 180mm rotor at the rear you can get the most out of your powerful brakes without worrying about frame flex affecting your handling.

Material: 3al-2.5v cold-worked Titanium Recommended Front fork travel: Best suited for 100mm Rear Rotor size: Accepts up to a 180mm rear rotor Headtube Design: Tapered/Integrated Bottom Bracket Type: 73mm threaded Seatpost Diameter: 27.2mm Seat Tube Diameter: 34.9mm Front derailleur type: 34.9 low mount top pull front derailleur (Frame also has downtube cable routing for new Shimano side pull front derailleurs) Cable routing: All under top tube Wheel Size: 27.5" Max Tyre Width: Clearance for up to a 2.5" tyres Brake Type: Disc Dropouts: 12x148mm thru axle dropout configuration (12x1mm thread pitch) - DT Swiss RWS X-12 Boost 148mm x 12mm axle not supplied Rear Spacing: 12x148mm - DT Swiss RWS X-12 Boost 148mm x 12mm axle not supplied.